| Size Range | From 2.2 inch to 24 inch |
|---|---|
| Interface | 4-wire/5-wire/8-wire |
| Advantages | Low Power Consumption /Liquid Resistant/Works with Finger, Glove, and Any Pointing Device |
| Disadvantages | Requires Periodic Calibration /Less Durable than Other Touch Technology/Lower Transmittance and Overall Optical Quality |
Resistive touch screen – for industrial equipment
SKY-TDM's resistive touchscreens range in standard sizes from 2.2 inches to 24 inches, suitable for bare fingers and gloved finger operation, allowing for multiple ways of touch response; Widely used in medical, industrial, rail transit and retail fields, it designs and manufactures 4-wire, 5-wire and 8-wire resistive touch screen products for various industries. For projects that require a low-cost, low-power pressure-sensitive touchscreen, SKY-TDM's resistive touchscreens offer a very high level of flexibility and value in terms of structure, design, and performance.
Whether your project requires enhanced optics or other advanced features, our resistive touchscreens can be designed and manufactured to meet your needs.
HOW IT WORKS The resistive touch screen consists of a glass layer with a conductive coating on the top and a polyester top plate with a conductive coating on the bottom. Conductive surfaces are separated by "insulating points", usually screen-printed insulating points on coated glass. In a 2-wire resistive design, a voltage is applied to the 4 corners of the glass layer. When touching the surface of the screen, its conductive book is in contact with the conductive side of the glass, effectively shutting down the circuit, and the voltage of the contact point is read from the wire connected to the top plate. |
|
SKY-TDM has successfully delivered pure flat resistive touch screens to numerous clients. Compared to conventional resistive touch screens, our solution provides superior performance, enhanced durability, and an improved touch experience. For more information, PLEASE CONTCT US.
SKY-TDM accepts your customized needs, starting from the initial R&D and design, until the test meets the requirements and mass production and shipment, and provides technical support and services at all stages, shortening the product time to market, saving you time and money.
